發布時間：2021-04-03 點擊：

定型機、涂層機專業生成廠家無錫前洲興華機械2021年4月3日訊 大熱定型機一直是紡織印染行業最主要的設備之一，其維護保養對生產的穩定至關重要。

Heat setting machine is one of the most important equipment in textile printing and dyeing industry, and its maintenance is very important to the stability of production.

多數定型機關鍵部位都存在高溫情況：其中傳送鏈條或鏈夾的溫度大約180℃—230℃之間，而熱風機馬達軸承所處溫度大約150℃—170℃之間，調幅絲桿所在區域最高溫度達170℃。

Most of the key parts of the setting machine have high temperature: the temperature of the transmission chain or chain clip is about 180 ℃ - 230 ℃, the temperature of the motor bearing of the hot air blower is about 150 ℃ - 170 ℃, and the maximum temperature of the area where the amplitude modulation screw is located is 170 ℃.

高溫環境下，設備不能經常停機，要保持其正常運轉，對潤滑的要求就更為嚴格，除了對潤滑劑具備抗高溫的要求外，還得保證其長效性和無殘留，防止結焦積碳對關鍵部位造成卡死。

Under the high temperature environment, the equipment can not be shut down frequently. In order to maintain its normal operation, the requirements for lubrication are more strict. In addition to the requirements for high temperature resistance of lubricants, the long-term performance and no residue of lubricants must be ensured to prevent coking and carbon deposition from blocking the key parts.

JAFLUB?佳弗潤潤滑劑針對定型機的關鍵潤滑部位，研發出以下產品：

According to the key lubrication parts of the shaping machine, JAFLUB? lubricant has developed the following products:

使用部位 Application site	產品型號 Product model	產品描述 Product description
高溫鏈條 High temperature chain	JAFLUB?  CA 0380	高性能氟塑潤滑脂，耐 高溫達288℃，揮發極少，不燃燒、不積碳，潤滑周期一年以上 High performance fluoroplastic grease, high temperature resistance up to 288 ℃, little volatilization, no combustion, no carbon deposition, lubrication cycle more than one year
鏈夾 Chain clip	JAFLUB?  CA 2100	耐溫250℃，無結焦積碳，不滴落，揮發小 Temperature resistance 250 ℃, no coking and carbon deposition, no dripping, little volatilization.
熱風機馬達 Hot air blower motor	JAFLUB?  X 802	長效耐高溫合成潤滑脂，耐高溫達200 ℃ Long term high temperature resistant synthetic grease, high temperature resistance up to 200 ℃.

聲明：本站信息來源于網絡或者為原創文章，如對貴站有所侵犯，請聯系管理員。

上一篇：滌綸織物染黑色有方法提高烏黑度？      

猜猜您喜歡的：

2021-04-03 紡織印染潤滑-定型機篇

2021-04-03 滌綸織物染黑色有方法提高烏黑度？

2021-04-02 各種柔軟劑的種類與特點詳解

2021-04-01 分散／活性染料一浴法染色工藝

2021-04-01 滌綸與錦綸，怎么區分？

2021-03-31 直接染料的前世今生

2021-03-31 活性染色中純堿、磷酸三鈉、代用堿的不同區別

2021-03-29 告別回修率！棉織物“死折痕”、尺寸不穩定、布面效果...

2021-03-29 白棉花為何上了“黑名單”？央視揭露幕后黑手

2021-03-26 紗線染色的重現性太差問題，原因終于找到了，解決辦法...